1. The equipment is designed and manufactured in a way that can collect 99.99% (HEPA filters) of particles of dusts with the size of 0.3㎛ in the temperature of 300°C or higher
2. The temperature difference (between the upper and lower sections) in the large size clean ovens has been radically reduced thanks to the multi-stage filtering system developed on our own
3. The indoor air will be managed by using the clean air circulation system manufactured with independently developed technologies
4. In order to make it more convenient to maintain and replace filters, a sealed packing door is installed at the back side of the equipment

1. The equipment is designed and manufactured in a way that can collect 99.99% (HEPA filters) of particles of dusts with the size of 0.3㎛ in the temperature of 300°C or higher
2. The temperature difference (between the upper and lower sections) in the large size clean ovens has been radically reduced thanks to the multi-stage filtering system developed on our own
3. The indoor air will be managed by using the clean air circulation system manufactured with independently developed technologies
4. In order to make it more convenient to maintain and replace filters, a sealed packing door is installed at the back side of the equipment

1.This is an aging equipment for enhancing products' durability by discharging the out-gas in the LED temperature-based hardening process.

1. LED Magazine을 IN-LINE으로 구성한 LED Curing Reflow 장비 입니다.
2. Off-line을 in-line하여 작성효율및 생산성 효율을 높였습니다.
3. Easy to manage the temperatures and production quantities by using high-level communication interface.
4. Saving of the production unit cost is realized as the system consumes minimum quantity of nitrogen thanks to the efficient pressure control for the supply of nitrogen.
5. No secondary pollution as the system is designed in a way that out-gas can be discharged smoothly.
6. For the supply of hot air, the HEPA filters are installed to collect 99.99% of the particles with the size of 0.3㎛.

1. This is a LED curing reflow equipment for which lamps are used as the heat resource.
2. Off-line을 in-line하여 작성효율및 생산성 효율을 높였습니다.
3. Easy to manage the temperatures and production quantities by using high-level communication interface
4. Saving of the production unit cost is realized as the system consumes minimum quantity of nitrogen thanks to the efficient pressure control for the supply of nitrogen
5. No secondary pollution as the system is designed in a way that out-gas can be discharged smoothly
6. The hardening process take places more stably and swiftly compared with the hot air blowing method.

This equipment is for conducting the temperature-based aging after loading products on individual sliding drawers. It can be used for conducing a temperature test, before shipping the products, in order to enhance their durability or for conducting a heat-resistance test.
The inner structures of drawers can be manufactured variously by using different jigs depending on the products.

The inner shelves for loading specimens are manufactured in a sliding type that is suitable for the cases where shelves need to slide for various purposes including loading of heavy samples.

1. Manufactured in a way that products can be hardened due to temperature-induced stress or aging while being transported through a conveyor system.
2. Excellent in the inner distribution and designed and manufactured in a way that the inner temperature of products can reach the set temperature as soon as possible, which will help realize tests and aging of products very efficiently.